PVC - Irrigation P.I.P.

PVC P.I.P. Irrigation Pipe
DR 64/DR 51/ DR 41/ DR 32.5

Pressure Rated 63, 80, 100 and 125 psi
Ring-Tite™ Joints 6" - 27"

For Use In Irrigation, Rural Water Systems and Other Services

JM Eagle’s Irrigation pipe is made in compliance with industry accepted P.I.P. (irrigation) pipe standards. Pipe 6” through 27 ” in diameter are produced in accordance with the Natural Resources Conservation Service NRCS 430-DD specification and dimensionally comply with Annex A1 of ASTM D2241. Pipes are available in DR 64 (63 psi), DR 51 (80 psi), DR 41 (100 psi), and DR 32.5 (125 psi). PVC compounds used in the extrusion of this pipe meet or exceed the requirements of ASTM D1784 cell class 12454. Joint design is tested to the requirements of ASTM D3139 with rubber gaskets that conform to ASTM F477.