HDPE HI-PRO FOR IRRIGATION & WATER SYSTEMS
Meets AWWA C901, ASTM D2239, ASTM D2737, ASTM D3035, Cell Class Per ASTM D3350,
PPI LISTED MATERIAL (TR-4) PE 3408/4710 and ANSI/NSF-14.
JM Eagle’s high-density polyethylene water pressure pipes are suitable for irrigation and water service applications.
JM Eagle’s Hi-Pro high-density polyethylene water and sewer pipe is made from premium, highly engineered PE 4710 resin material for a maximum pressure rating to service today’s irrigation and water needs
.
Products are available in 1⁄2- to 6-inch diameters. The product’s physical properties make it applicable to open-trench, trenchless and slip-lining applications.
PE 4710 surpasses PE 3408 in the following high-performance designations:
- Density class 4 (0.947 – 0.955 g/cc) vs. density cell class 3 (> 0.940 – 0.947 g/cc).
- SCG (slow crack growth) cell class 7 or PENT value of 500 hours vs. SCG cell class 4 or PENT value of 10 hours.
- 1,000 psi HDS (hydrostatic design stress) vs. 800 psi HDS.
JM Eagle’s HDPE Hi-Pro pipe for irrigation and water is manufactured for superior performance and an extended life expectancy.
- Its high-strength walls give it the highest PE pressure rating, outstanding resistance to slow crack growth and increased resistance to rapid crack propagation.
- The increased working stress rating of high-performance PE 4710 resin material allows use of a larger inside diameter (thinner wall) for a given operating pressure, making it a superior choice over steel or ductile iron pipe, especially for the large-diameter pipe sizes.
- The larger inside diameter of JM Eagle Hi-Pro pipe not only improves system capability and flow, but it also lowers the cost of the pipe and its handling and installation, making it a more cost-effective choice over the same competing products.
