You are here

IPS Pressure Rated / Ring-Tite

Application: 

JM Eagle’s IPS Pressure is pipe suitable for use in rural water, and agricultural and turf irrigation pipelines, as well as gravity sewer, force main and water reclamation projects

Benefits: 

Due to its long laying lengths of 20 feet, IPS Pressure PVC water pipe reduces the cost of multiple joints and allows for more ground to be covered during installation. JM Eagle IPS Pressure pipe:

  • Maintains performance against tuberculation, corrosion and external galvanic soil conditions without lining wrapping, coating or cathodic protection.
  • Can be field-cut with a power saw or handsaw, eliminating the need to invest in costly cutting equipment.
  • Maintains smooth interior over long years of service with virtually no loss in carrying capacity, allowing for savings in pumping costs, as well as savings on the size of the pipe required.
Descriptions: 

PVC I.P.S. Pressure Rated Pipe
DR 41/DR 32.5/DR 26/DR 21/ DR 17
Pressure Rated 100, 125, 160, 200 and 250 psi
Ring-Tite Joint 1.5" - 12"

For Use In Rural, Agricultural Water Systems and Other Services.

JM Eagle’s (JM Eagle) I.P.S. Pressure PVC Pipe conforms to ASTM D 2241 for standard dimension ratios and is available in SDR 41 (100 psi), SDR 32.5 (125 psi), SDR 26 (160 psi), SDR 21 (200 psi) and SDR 17 (250 psi). PVC compounds used in the extrusion of this pipe meet or exceed the requirements of ASTM D1784 cell class 12454. Rieber gaskets conform to ASTM F477. Joint design is tested to the requirements of ASTM D3139.

Overall Pipe Type: